PCC vs. MCC vs. APFC Panels Explained
Clear engineering breakdown of Power Control Centres (PCC), Motor Control Centres (MCC), and Automatic Power Factor Correction (APFC) panels under IS 8623 / IEC 61439.
Distinct Roles Inside an Industrial Electrical Room
While all three sit inside the LT panel room and share CRCA powder-coated enclosures conforming to IS 8623 / IEC 61439, each switchboard performs a specialized electrical function:
- PCC (Power Control Centre): The primary intake switchboard receiving power directly from the distribution transformer (and DG set via interlock). Houses high-current Air Circuit Breakers (ACBs, 630A–4000A), main electrolytic busbars, and high-capacity MCCB outgoing feeders supplying sub-panels.
- MCC (Motor Control Centre): Downstream panel dedicated to starting, protecting, and controlling industrial motors—integrating DOL, Star-Delta, Soft-Starter, or VFD feeders with overload relays and remote push-button stations.
- APFC (Automatic Power Factor Correction Panel): Continuously monitors inductive reactive power (kVAR) via an incomer CT and switches capacitor steps automatically to maintain power factor close to unity (>0.98 lag), preventing MSEDCL kVAh billing penalties.
Critical Specification Checks Before Ordering
Always verify short-circuit withstand rating (kA for 1 sec), busbar current density (typically ≤ 1.6 A/mm² for copper or ≤ 0.8–1.0 A/mm² for aluminium), IP rating (IP54 for dusty MIDC shops), and 7% detuned reactors for APFC panels serving VFD loads.
Apply These Standards on Your Facility
AAROHAN ELECTRICALS executes IS/IEC and CEA 2023 compliant electrical contracting across Badlapur, Ambernath, Thane, Navi Mumbai, MMR, Pune, and Maharashtra MIDC zones.