CEA Safety Regulations 2023 Checklist for Factories
Mandatory electrical clearances, IS 15652 insulating mats, earthing, LOTO, and periodic inspection rules under CEA (Measures relating to Safety and Electric Supply) Regulations, 2023.
Why CEA Safety Regulations, 2023 Matter for Maharashtra Industries
The Central Electricity Authority (Measures relating to Safety and Electric Supply) Regulations, 2023—along with subsequent 2026 Amendments—replaced the older 2010 framework and serve as the legally binding electrical safety code for every factory, commercial complex, and substation in India. During Chief Electrical Inspector (CEIG) inspections in Maharashtra, non-compliance with these provisions is the single most common reason charging approvals are delayed.
Core Electrical Room & Substation Safety Checklist
- Working Clearances Around Switchboards: Maintain unobstructed front operating space (minimum 1.0 m for LT panels and higher for HT VCB/RMU bays) and rear access clearance where rear doors exist.
- Insulating Rubber Mats (IS 15652): Lay ISI-marked, voltage-rated insulating mats continuously in front of all LT PCC, MCC, APFC, and HT switchboards.
- Danger Notices & Shock Treatment Charts: Display bilingual/multilingual (English, Hindi, Marathi) danger plates on transformers, HT cubicles, and LT panels, plus laminated artificial respiration charts in the substation room.
- Fire-Fighting Readiness: Install CO2 / Dry Chemical Powder (DCP) extinguishers rated for electrical fires and maintain dry sand buckets near oil-filled transformers.
- Residual Current Protection (RCCB / ELCB): Mandatory 30 mA / 100 mA residual current devices on final sub-circuits and portable industrial sockets.
Statutory Maintenance Logs & Periodic Testing
Industrial consumers with notified voltage or load thresholds must maintain updated Single Line Diagrams (SLDs), annual earth resistance logs (IS 3043), transformer oil BDV records, and insulation resistance (Megger) test sheets signed by an authorized electrical supervisor.
Apply These Standards on Your Facility
AAROHAN ELECTRICALS executes IS/IEC and CEA 2023 compliant electrical contracting across Badlapur, Ambernath, Thane, Navi Mumbai, MMR, Pune, and Maharashtra MIDC zones.